◾ Enhancement of mechanical and tribological performance of Ti–6Al–4V alloy by laser surface alloying with Inconel 625 and SiC precursor materials, Friction, vol.12 No.9 pp.2089~2107, 2024김홍석
◾ A Study on the Shear Characteristics based on the Coverage of Shot-peened Al6061-T6 Bonded with CFRP, Journal of the Korean Society for Precision Engineering, vol.41 No.1 pp.31~36, 2024김홍석
◾ In situ synthesis and stabilization of PVP-coated aluminum nanoparticles by one-step pulsed laser ablation in liquid: Investigation and quantification of PVP coverage effects, Surfaces and Interfaces, vol.43, 2023김홍석
◾ Development and characterization of Ni60 alloy and SiC ceramic reinforced metal matrix composite coating on Ti-6Al-4V using laser cladding with coaxial powder feeding system, International Journal of Advanced Manufacturing Technology, vol.128 No.5-6 pp.2705~2718, 2023김홍석
◾ Characterization of the coating structure and stability of core-shell Al nanoparticles generated by using pulsed laser ablation in acetone, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, vol.19 pp.4683~4696, 2022김홍석
◾ Effect of Environmental Gas and Process Variables on Surface Properties of Laser-clad Ti-6Al-4V Alloy with SiC Nanopowders, The Korean Society of Manufacturing Technology Engineers, vol.31 No.1 pp.28~36, 2022김홍석
◾ Simultaneous improvement in the hardness and friction characteristics of Ti-6Al-4V through laser cladding with nanoscale SiC particles in an air environment, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.116 No.3-4 pp.1041~1051, 2021김홍석
◾ A statistical approach to controlling the size of aluminum nanoparticles synthesized by pulsed laser ablation in liquid, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.111 No.11-12 pp.3393~3404, 2020김홍석
◾ Laser Shock Surface Patterning of Steel and Aluminum Contact Surfaces and its Effect on Tribological Properties, Journal of the Korean Society of Manufacturing Technology Engineers, vol.29 No.4 pp.288~295, 2020김홍석
◾ The homogeneity of multi-textured micro-pattern arrays in a laser shock surface patterning process and its effect on the surface properties of aluminum alloy, SURFACE COATINGS TECHNOLOGY, vol.382, 2020김홍석
◾ Performance evaluation of laser shock micro-patterning process on aluminum surface with various process parameters and loading schemes, OPTICS AND LASERS IN ENGINEERING, vol.124, 2020김홍석
◾ Effects of laser parameters on morphological change and surface properties of aluminum alloy in masked laser surface texturing, Journal of Manufacturing Processes, vol.48 pp.260~269, 2019김홍석
◾ Analysis and modeling of process variables in surface hardening process of Ti-6Al-4V using laser, Journal of the Korean Society for Precision Engineering, vol.36 No.8 pp.771~776, 2019김홍석
◾ Shaping of Micro Scale Features on Metallic Surfaces through the High-Speed Impact of Laser Accelerated Flyers, J. Korean Soc. Precis. Eng., vol.35 No.7 pp.729~734, 2018김홍석
◾ Formability and fracture of metallic sheet materials in microscale punching processes using laser-accelerated flyer impact, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.96 No.9-12 pp.3511~3520, 2018김홍석
◾ Evaluation of Accelerated Life of High-temperature Deteriorated Rubber by Stress Relaxation, J. Korean Soc. Manuf. Technol. Eng., vol.27 No.1 pp.7~13, 2018김홍석
◾ Patterning and Characterization of Micro-dimple Arrays on Metallic Surfaces by Laser-accelerated Flyer Impact, J. Korean Soc. Manuf. Technol. Eng., vol.27 No.1 pp.20~26, 2018김홍석
◾ Quantitative modeling and characterization of the size effects in microscale coining process of copper, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, vol.51 pp.490~498, 2018김홍석
◾ Temperature-dependent Mullins Effect in Anti-vibration Rubber for Railway Vehicles, 한국생산제조학회지, vol.26 No.2 pp.193~198, 2017김홍석
◾ 수분오염 윤활환경 하에서 구름접촉 피로손상의 미시적 관찰, 한국기계기술학회지, vol.19 No.2 pp.228~234, 2017김홍석
◾ Effect of Water Contamination of the Lubricant and Surface Roughness of Bearing Steel on the Rolling Contact Fatigue Life, 한국안전학회지, vol.32 No.1 pp.15~20, 2017김홍석
◾ A Study on Detection of a Critical Spot and the Securing Safety Method of CFRP Bicycle Forks by Finite Element Method, 한국안전학회지, vol.31 No.6 pp.1~5, 2016김홍석
◾ Estimation of the Overhaul Cycle Time for KTX Wheelset Bearing by RCF Test, 한국안전학회지, vol.31 No.1 pp.13~18, 2016김홍석
◾ A Study on the Accelerated Life Test of Rubber Specimens by using Stress Relaxation, 한국안전학회지, vol.31 No.1 pp.19~24, 2016김홍석
◾ Development of Real-Time Condition Diagnosis System Using LabVIEW for Lens Injection Molding Process, 한국정밀공학회지, vol.33 No.1 pp.23~29, 2016김홍석
◾ A quantitative study of the tribological size effect in microforming with a multi-region FEA model, TRIBOLOGY INTERNATIONAL, vol.90 pp.104~112, 2015김홍석
◾ MultiTrack: A multi-linked track robot with suction adhesion for climbing and transition, ROBOTICS AND AUTONOMOUS SYSTEMS, vol.72 pp.207~216, 2015김홍석
◾ Characterization of Microscale Drilling Process for Functionally Graded M2–Cu Material Using Design of Experiments, 한국생산제조시스템학회지, vol.24 No.5 pp.502~507, 2015김홍석
◾ Experimental Study on the Size Effect and Formability of Sheet Materials in Microscale Deep Drawing Process, 한국정밀공학회지, vol.32 No.9 pp.793~798, 2015김홍석
◾ Determination of the tribological size effects in microforming through the scaled upsetting tests of disks, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.75 No.43355 pp.1253~1261, 2014김홍석
◾ Material Pixel-based Process Planning for Layered Manufacturing of Heterogeneous Objects, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.15 No.11 pp.2421~2427, 2014김홍석
◾ The Flow Behavior Modeling of AZ61 Magnesium Alloy at Elevated Temperatures Considering the Effects of Strain Rate and Grain Size, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.15 No.4 pp.745~751, 2014김홍석
◾ Investigations into the size effect on plastic deformation behavior of metallic materials in microcoining process, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.15 No.1 pp.5~11, 2014김홍석
◾ Prediction of Cutting Forces and Estimation of Size Effects in End Milling Operations by Determining Instantaneous Cutting Force Constants, Journal of the Korean Society of Manufacturing Technology Engineers, vol.22 No.6 pp.1003~1009, 2013김홍석
◾ A Theoretical and Experimental Study on the Tribological Size Effect in Microforming Processes, Transactions of Materials Processing, vol.22 No.7 pp.394~400, 2013김홍석
◾ Kinematic Analysis of Levering Systems in Compound Bows, Transactions of the Korean Society of Mechanical Engineers, vol.37 No.1 pp.55~60, 2013김홍석
◾ Utilization of Finite Element Analysis in Design and Performance Evaluation of CFRP Bicycle Frames, Transactions of the Korean Society of Mechanical Engineers, vol.37 No.1 pp.121~127, 2013김홍석
◾ Theoretical Analysis and Experimental Evaluation of Small Cyclone Separator to Remove Fine Particulate Matter, Transactions of the Korean Society of Mechanical Engineers, vol.37 No.1 pp.77~82, 2013김홍석
◾ Experimental and Numerical Analyses of Flexible Forming Process for Micro Channel Arrays of Fuel Cell Bipolar Plates, 소성가공, vol.21 No.8 pp.499~505, 2012김홍석
◾ Development of a Miniaturized Microforming System and Investigation of Deformation Behavior of Material for the Production of Micro Components by Forming, 한국정밀공학회지, vol.29 No.11 pp.1221~1227, 2012김홍석
◾ A Study on Performance Improvement of Electrical Discharge Machining for Producing Micro-holes Using a Shot Blasting Surface Treatment, 소성가공, vol.21 No.5 pp.312~318, 2012김홍석
◾ A Geometry-based Method for Prediction of Shot-peening Coverage, Key Engineering Materials, 2012김홍석
◾ Experimental and Numerical Analysis of Polymer Deformation in Thermal Nanoimprint Lithography, Key Engineering Materials, 2012김홍석
◾ Design of a Transformable Track Mechanism for Wall Climbing Robots, 한국정밀공학회지, vol.29 No.2 pp.178~184, 2012김홍석
◾ Size dependence of flow stress and plastic behaviour in microforming of polycrystalline metallic materials, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, vol.226 No.C2 pp.403~412, 2012김홍석
◾ A combined FEA and design of experiments approach for the design and analysis of warm forming of aluminum sheet alloys, International Journal of Advanced Manufacturing Technology, vol.0 No.0 pp.1~14, 2010김홍석
◾ Investigation on the size effects of polycrystalline metallic materials in microscale deformation processes, Transactions of the Korean Society of Mechanical Engineers, vol.34 No.10 pp.1463~1470, 2010김홍석
◾ A study of friction in microfoming using ring compression tests and finite n element analysis, Transactions of the Korean Society of Mechanical Engineers, vol.34 No.10 pp.1471~1478, 2010김홍석
◾ 건성 와이어방전가공 프로세스 특성에 관한 실험적 연구, 한국정밀공학회지, vol.27 No.1 pp.11~17, 2010김홍석
◾ An Experimental Study on the Failure Characteristics of Flip Chips in Cyclic Bending Test, 한국공작기계학회지, vol.18 No.4 pp.362~368, 2009김홍석
◾ Numerical investigations on springback characteristics of aluminum sheet metal alloys in warm forming conditions, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.204 No.1-3 pp.370~383, 2008김홍석
◾ Development of an analytical model for warm deep drawing of aluminum alloys, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.197 No.1-3 pp.393~407, 2008김홍석
◾ A hybrid multi-fidelity approach to the optimal design of warm forming processes using a knowledge-based artificial neural network, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, vol.47 No.2 pp.211~222, 2007김홍석
◾ Determination of proper temperature distribution for warm forming of aluminum sheet materials, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, vol.128 No.3 pp.622~633, 2006김홍석
◾ Finite element modeling and analysis of warm forming of aluminum alloys - Validation through comparisons with experiments and determination of a failure criterion, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, vol.128 No.3 pp.613~621, 2006김홍석
◾ K.H. Shin, J.H. Park, G.M. Sung, B.J. Kang, H.S. Kim, S.K. Cheong, A Study on Shear Characteristics according to the Coverage of Shot-peened Al6061-T6 Specimens Bonded with CFRP Composites, Proceedings of KSPE 2023 Spring Conference, Jeju, 2023김홍석
◾ Huan Wang, Hong Seok Kim, Fabrication of Nickel-based MMC Coating on Titanium Surfaces based on Coaxial Powder Feeding Laser Cladding, Proceedings of KSPE 2023 Spring Conference, Jeju, 2023김홍석
◾ Yujae Lee, Hong Seok Kim, Evaluation of Antibacterial Activity of Copper Oxide Nanoparticles at Different Chemical Compositions and Concentrations, Proceedings of KSPE 2023 Spring Conference, Jeju, 2023김홍석
◾ Hao-Ran Cheing, Hong Seok Kim, Microstructure and Mechanical Properties of Inconel 625-based Composite Coatings Prepared on Titanium Substrates using SiC Ceramic Nanoparticles, Proceedings of KSPE 2023 Spring Conference, Jeju, 2023김홍석
◾ Yujae Lee, Hyunseok Choi, Hong Seok Kim, Synthesis of Aluminum Nanoparticles through Pulsed Laser Ablation in Liquid and the Effect of PVP Polymer Coating, Proceedings of KSPE 2023 Spring Conference, Jeju, 2023김홍석
◾ Dae Cheol Choi, Hong Seok Kim, Colloidal Stability Analysis of Surface Modified Aluminum Nanoparticles using Pulsed Laser, Proceedings of the 9th International Conference on Manufacturing, Machine Design and Tribology, Jeju, 2023김홍석
◾ 최현석, 오준우, 김홍석, Early Detection of Bearing Failure Used in Power Plant Based on Ultrasound, Proceedings of the KSME Conference, 제주, 2022김홍석
◾ 최현석, 김홍석, Size Control of Aluminum Nanoparticles using PVP Polymer in Pulsed Laser Ablation in Liquid Process, Proceedings of the KSME Conference, 제주, 2022김홍석
◾ 최대철, 김홍석, Surface Analysis of Synthesized Core-shell Aluminum Nanoparticles by Pulsed Laser Ablation in Organic Solvents, Proceedings of the KSME Conference, 제주, 2022김홍석
◾ 정호연, 조유빈, 김홍석, A Study on the Improvement of Surface Properties of Ti-6Al-4V through Laser Cladding of Inconel 625 Alloy, Proceedings of the KSME Conference, 제주, 2022김홍석
◾ 이유재, 김홍석, Synthesis of Single-phase Copper Oxide Nanoparticles by Pulsed Laser Ablation in Liquid and Temperature Control, Proceedings of the KSME Conference, 제주, 2022김홍석
◾ 왕환, 이유재, 김홍석, Composite Coating of Ni60 and SiC Powders using Coaxial Laser Cladding for Surface Modification of Titanium Alloys, Proceedings of the KSME Conference, 제주, 2022김홍석
◾ 최현석, 김홍석, Passivation of Highly Reactive Aluminum Nanoparticles using PVP Polymer and Their Dispersion stability, Proceedings of the KSME Conference, 서울, 2022김홍석
◾ 최대철, 김홍석, Generation and Surface Structure of Aluminum Composite Nanoparticles by Pulsed Laser Ablation in Acetone, Proceedings of the KSME Conference, 서울, 2022김홍석
◾ 최대철, 한영구, 홍민철, 정성균, 신기훈, 김홍석, Shear characteristics of welded PP band specimens made by automatic strapping machine using heat, 한국생산제조학회 2021년도 춘계학술대회 논문집, 강릉, 2021김홍석
◾ 최대철, 김홍석, Generation of Stabilized Aluminum Nanoparticles by Carbon Encapsulation through Pulsed Laser Ablation in Aqueous Medium, 2021 년도 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 부산, 2021김홍석
◾ 최현석, 김홍석, Synthesis of PVP Stabilized Aluminum Nanoparticles by Laser Ablation in Polymer Solution, 2021 년도 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 부산, 2021김홍석
◾ 최현석, 강타오, 김홍석, Improvement of multiple surface properties of Ti-6Al-4V through laser surface treatment in an oxygen environment, 2021 KSME 바이오공학부문 춘계학술대회 논문집, 온라인, 2021김홍석
◾ Dae Cheol Choi, Hong Seok Kim, Synthesis and size control of aluminum nanoparticles using pulsed laser ablation in liquid, Proceedings of ICMTE 2020, 속초, 2020김홍석
◾ Tao Jiang, Hong Seok Kim, Improvement of wear and tribological performance of Ti-6Al-4V alloy by laser processing of SiC nanoparticle coating, Proceedings of ICMTE 2020, 속초, 2020김홍석
◾ T. Jiang, H. S. Kim, Improvement of Surface Properties of Ti-6Al-4V through Laser Cladding of SiC Nanopowders, KSPE 2020 CONFERENCE PROCEEDING, 온라인, 2020김홍석
◾ 김홍석, 최대철, A Study on the Size Distribution of Aluminum Nanoparticles Generated by Laser Ablation in Liquid, KSPE 2020 CONFERENCE PROCEEDING, 온라인, 2020김홍석
◾ 신기훈, 최동혁, 이정훈, 최대철, 김홍석, Analysis of Cutting Forces in Micro-milling of Functionally Graded Materials, KSPE 2020 CONFERENCE PROCEEDING, 온라인, 2020김홍석
◾ Dae Cheol Choi, Hong Seok Kim, Characterization of Pulsed Laser Ablation Technique in Liquid for the Production of Aluminum Nanoparticles, Proceedings of 5th ICMR, Jeju, Korea, 2019김홍석
◾ 구세주, 김홍석, Implementation of laser-based multi-surface textures for improving surface properties, Proceedings of the International Conference of Manufacturing Technology Engineers 2018, Seoul, 2018김홍석
◾ 최대철, 김홍석, Transfer of microscale square pattern using laser induced Plasma, Proceedings of the International Conference of Manufacturing Technology Engineers 2018, Seoul, 2018김홍석
◾ 최대철, 김홍석, A study on microscale patterning and surface wettability control using laser-induced shock wave, 2018년도 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 서울, 2018김홍석
◾ 원승재, 김홍석, A Study on Patterning Characteristics of Aluminum Surface Using A Pulsed Laser, 한국정밀공학회 2018 년도 춘계학술대회논문집, 제주, 2018김홍석
◾ 구세주, 김홍석, A Study on Hardness Improvement by Surface Patterning Using a Pulsed Laser, 한국정밀공학회 2018 년도 춘계학술대회논문집, 제주, 2018김홍석
◾ Hong Seok Kim, Dae Cheol Choi, Fabrication of Micro-Scale Dimple Arrays on Metallic Materials Using Laser-Accelerated Flyer Impact, Proceedings of MMME-17, Pattaya, Thailand, 2017김홍석
◾ 최대철, 김홍석, Velocity measurement and manufacturing performance evaluation of laser accelerated flyers, 대한기계학회 2017년도 학술대회 논문집, 제주, 대한민국, 2017김홍석
◾ 구세주, 원승재, 김홍석, A study on ablation characteristics of a pulsed laser for aluminum at various process conditions, 대한기계학회 2017년도 학술대회 논문집, 제주, 대한민국, 2017김홍석
◾ Chung-Ki Sim, Sunghun Oh, Hong Seok Kim, Ki-Hoon Shin, Seong-Kyun Cheong, Effect of shot peening intensity on rolling contact fatigue life of high carbon chromium steel, Proceedings of ICSP13, Montreal, Canada, 2017김홍석
◾ 김홍석, 유지혜, 최대철, Investigation on microscale deformation and failure characteristic in laser-driven flyer system, 한국생산제조학회 2017년도 춘계학술대, 대구, 2017김홍석
◾ Sunghun Oh, Su-Yeong Lee, Jihye You, Hong Seok Kim, Seong-Kyun Cheong, Ki-Hoon Shin, Stress softening and recovery of natural rubber under repeated loading and unloading, Proceedings of the 7th ICMDT, Jeju, Korea, 2017김홍석
◾ Dae Cheol Choi, Ji Hye You, Hong Seok Kim, The development of velocity measurement system for a metal flyer accelerated by a nanosecond pulsed laser, Proceedings of the 7th ICMDT, Jeju, Korea, 2017김홍석
◾ Ji Hye You, Dae Cheol Choi, Hong Seok Kim, Shape control of microscale features on metal sheet through the impact of a laser-driven metal foil, Proceedings of the 7th ICMDT, Jeju, Korea, 2017김홍석
◾ Hong Seok Kim, Ji-Hye You, Dea Cheol Choi, Fabrication of microscale features through the ballistic impact of a metallic hypervelocity flyer, Proceedings of ICRMAE 2017, 태국 방콕, 2017김홍석
◾ Ji-Hye You, Dae-Cheol Choi, Hong Seok Kim, Shaping of Microscale Features on Thin Metallic Materials using Flyer Impact, Proceedings of the ICMTE 2016, 서울, 2016김홍석
◾ Hong Seok Kim, Ji-Hye You, Dae Cheol Choi, The Fabrication of Microscale Features on Metallic Materials by Laser-Driven Dynamic Loading, Conference Proceedings of ISEAS 2016, 미국, 2016김홍석
◾ 이수영, 정성균, 이남주, 최웅재, 김홍석, 신기훈, 복합재 적용 자전가 프레임과 포크의 파손지수 평가, 한국재료학회 2016 춘계학술대회 발표집, 여수, 2016김홍석
◾ 김홍석; 남정수, A Study on Deformation Behavior of Copper Shet Materials in Microscale Deep Drawing Process, 한국생산제조시스템학회 추계학술대회, 제주, 2015김홍석
◾ 김홍석;유지혜, 레이저 플라즈마를 이용한 정밀가공 공정에 대한 이론적 및 실험적 연구, 한국정밀공학회 2015년도 춘계학술대회논문집, 제주, 2015김홍석
◾ 김홍석;이은석;이광호, 레이저 유도 가속 시스템에서 금속 플라이어의 충돌특성에 관한 연구, 한국정밀공학회 2015년도 춘계학술대회논문집, 제주, 2015김홍석
◾ 김홍석;유지혜, 레이저 플라즈마를 이용한 동적 정밀가공 공정에 관한 연구, 한국생산제조시스템학회 2015년도 춘계학술대회, 대전, 2015김홍석
◾ 김홍석;이용성;유지혜;이은석;이광호, 레이저 가속 플라이어를 이용한 고속 마이크로 가공 공정에 관한 연구, 대한기계학회 2014년도 추계학술대회 논문집, 김대중컨벤션센터, 2014김홍석
◾ 남정수;이상원;류지혜;김홍석, 마이크로 딥 드로잉 공정에서 크기효과 및 블랭크 홀더 갭 영향에 대한 실험적 연구, 한국정밀공학회 2014년도 추계학술대회 논문집, 창원컨벤션센터, 2014김홍석
◾ 남정수; 이상원; 김홍석, Experimental Estimation of Size Effect and Formability in Microscale Deep Drawing Process using Copper Sheet, Proc. of MSEC 2014, 디트로이트, 2014김홍석
◾ 남정수, 이상원, 신기훈, 김홍석, Experimental Studies of The Size Effect and Formability of Materials in Micro Deep Drawing Process, 한국정밀공학회 2013년도 추계학술대회논문집, 부산, 2013김홍석
◾ 김홍석, 오인식, 최재욱, Investigation on the size effect and cutting force coefficients in micro end milling process, 2013년도 제10회 금형가공 심포지엄 논문집, 한국과학기술회관, 2013김홍석
◾ 김홍석, 신기훈, Pixel-based Process Planning for Layered Manufacturing of Heterogeneous Objects, Proceeding of ISGMA 2013, 미국, 2013김홍석
◾ 신기훈, 이용성, 김홍석, The Flow Behavior Modeling of AZ61 Magnesium Alloy at Elevated Temperatures Considering the Effects of Strain Rate and Grain Size, Proceeding of ISGMA2013, 미국, 2013김홍석
◾ 김홍석, 박일구, Modeling of the size effects in microforming by cylindrical upsetting tests, 2013년도 한국소성가공학회 춘계학술대회 논문집, 부산, 2013김홍석
◾ 이용성, 신기훈, 정성균, 김홍석, 이종엽, 최웅재, An experimental study on the durability compound bow wings, 한국정밀공학회 2012년도 추계학술대회 논문집, 광주과기원, 2012김홍석
◾ 심재민, 김홍석, A study on rubber-assisted microforming process for fabrication of micro-channel arrays on bipolar plates of fuel cell, Proceedings of the International Conference of Manufacturing Technology Engineers 2012, Millennium Seoul Hilton Hotel, 2012김홍석
◾ 서시원, 윤종운, 김홍석, The effect of shot peening intensity on high temperature fatigue behavior of an aluminum alloy, Proceedings of the International Conference of Manufacturing Technology Engineers 2012, Millennium Seoul Hilton Hotel, 2012김홍석
◾ 김홍석, 오태진, 심재민, Forming of Microscale Flow Channels for Proton Exchange Membrane Fuel Cells Using a Hyperelastic Rubber Material, 2012년도 한국소성가공학회 추계학술대회 논문집, 경주, 2012김홍석
◾ 이용성, 김홍석, 정성균, 최웅재, 김영근, 박경래, 신기훈, 컴파운더 보우 지레 시스템의 기구학적 해석, 2012 대한기계학회 생산 및 설계공학 부문 춘계학술대회 논문집, 대전컨벤션센터, 2012김홍석
◾ 김홍석, 고한결, 미립 물질 제거를 위한 소형 사이클론 분리기의 이론적 연구 및 실험적 검증, 2012 대한기계학회 생산 및 설계공학 부문 춘계학술대회 논문집, 대전컨벤션센터, 2012김홍석
◾ 이용성, 신기훈, 정성균, 최웅재, 김영근, 박경래, 김홍석, 유한요소해석을 이용한 CFRP 자전거 프레임의 설계 및 성능 평가, 2012 대한기계학회 생산 및 설계공학 부문 춘계학술대회 논문집, 대전컨벤션센터, 2012김홍석
◾ 김홍석, 김준현, 공학설계 및 종합설계의 체계적 교육, 2012년도 대한기계학회 교육부문 춘계학술대회 논문집, 한양대학교, 2012김홍석
◾ 남정수, 이상원, 김홍석, 미세성형 공정에서 소재의 크기효과 및 마이크로 스케일 변형특성에 관한 실험적 평가, 한국정밀공학회 2012년도 춘계학술대회논문집, 라마다제주호텔, 2012김홍석
◾ 김홍석, 박일구, 남정수, 이상원, 마이크로 영역에서 금속 재료의 미세패턴 성형 및 변형특성에 관한 연구, 2012년도 한국소성가공학회 춘계학술대회 논문집, 제주, 2012김홍석
◾ 고한결, 김홍석, 미립 물질 제거를 위한 사이클론 분리기의 설계 및 성능평가, 대한기계학회 재료 및 파괴부문 2012년도 춘계학술대회 논문집, 제주대학교, 2012김홍석
◾ A Geometry-based Method for Prediction of Shot-peening Coverage, ASPEN 2011 Abstract, 2011김홍석
◾ Experimental and Numerical Analysis of Polymer Deformation in Thermal Nanoimprint Lithography, ASPEN 2011 Abstract, 2011김홍석
◾ 김긍록, 마이크로 패턴 성형을 위한 금속소재의 변형거동 모델링, 한국정밀공학회 2011년도 추계학술대회논문집, 2011김홍석
◾ 금속 소재의 미세 패턴 가공을 위한 마이크로 성형시스템 개발, 한국정밀공학회 2011년도 춘계학술대회논문집, 2011김홍석
◾ 벽면간 전환 능력을 가진 다관절 등반로봇의 설계, 한국정밀공학회 2011년도 춘계학술대회논문집, 2011김홍석
◾ 수직벽 등반로봇을 위한 무한궤도휠 메커니즘 설계, 한국정밀공학회 2010 추계학술대회논문집, 2010김홍석
◾ 열 임프린트 미세성형을 위한 폴리머 소재의 점탄성 해석 및 실험적 고찰, 한국정밀공학회 2010 추계학술대회논문집, 2010김홍석
◾ 마이크로/나노급 패턴 성형을 위한 재료의 거동특성 고찰 및 실험적 검증, 대한기계학회 2010 추계학술대회 논문집, 2010김홍석
◾ Development of a multi-body wall climbing robot with tracked wheel mechanism, Proceedings of CLAWAR'2010, 2010김홍석
◾ 미세성형 공정에서 다결정 금속재료의 크기효과 및 거동특성에 관한 연구, 대한기계학회 생산 및 설계부문 춘계학술대회 논문집, 제주도, 2010김홍석
◾ 링 압축시험과 유한요소해석을 이용한 미세성형 공정에서의 마찰 및 윤활 특성에 관한 연구, 대한기계학회 생산 및 설계부문 춘계학술대회 논문집, 제주도, 2010김홍석
◾ 이용성, 김긍록, 심상미, 한유하, 신기훈, 김홍석, 마이크로 성형 공정을 위한 금속재료의 크기효과 고찰, 한국밀공학회 2009년도 추계학술대회 논문집, 대구 EXCO, 2009김홍석
◾ 마이크로 성형 공정을 위한 금속재료의 크기효과 고찰, 한국정밀공학회 2009 추계학술대회 논문집, 2009김홍석
Faculty
Introduction
Curriculum
Mechanical Engineering Program
Automotive Engineering Program